| Customization: | Available |
|---|---|
| Warranty: | One Year |
| Usage: | Fabric Textile Testing Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Introduction:
This tester is suitable for testing outerwear knitted and woven fabrics and other fabrics that are easy to snag, especially for the snagging properties of chemical fiber filaments and textured yarn fabrics. Put a chain-suspended hammer around the guide rod and put it on the surface of the sample sleeved on the drum. After the drum rotates at a constant speed for a certain number of times, remove the sample and compare it with the rating chart in the rating box. .
Product Discription:
The machine can quickly detect how easy or difficult the fabric is to get hooked (that is, hook the yarn out of the fabric) under normal wearing conditions. The instrument is equipped with an observation box and a comparison pattern card for different fabric structures. Equipped with 4 test rollers (covered with the fabric to be tested), the hammer ball is a tungsten carbide head and is controlled by a predetermined electronic counter.
Standard accessories: 2/4 rubber rings, 2/4 wool felt cylinders, 1 sampling plate, spacing ruler 45mm
Standard: ASTM D3939, JIS L1058, GB 11047
Accessories: Tungsten carbide crochet needles (12 pcs/pack); Felt sleeves (4 pcs/pack); refer to the hooking chart
| Working position | two groups / four groups optional |
| Test speed | 60±2 r/min |
| Testing Cylinder | outer diameter 82mm, length 210mm |
| Total Weight of Mace Ball | Weight 160±10g/pc |
| Nails | exposed length 10mm, 11 nails / hammer |
| Needle exposure length | diameter 10mm, spacing 12mm |
| Distance between hammer and guiding rod(connecting chain length) | 45mm |
| Test times | 600 times |
| Specimen size | 200x330mm,two pieces each in the warp and weft directions |
| Size(WxDxH) | 94.5x45x38cm |
| Weight | About 70kg |
| Power supply | 1∮,AC220V,3A |
){kind=link}