| After-sales Service: | Life Time |
|---|---|
| Power Supply: | 380V |
| Certification: | SGS |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Product use: The machine is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
The equipment is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB…
Features:
(1). With disk USB recording function, no recorder is required;
(2). Refrigerant servo valve flow calculation control. Power saving 30%;
(3). High temperature and high humidity test to prevent condensation, dripping water technology industry first
(4) In the low temperature working state, the heater does not participate in the work, and the refrigerant flow and flow direction of the refrigeration unit are controlled and adjusted by PWM technology, and the three-way flow of the refrigeration pipeline, cold bypass pipeline and hot bypass pipeline is adjusted to realize the temperature control of the working chamber. automatic constant. In this way, under low temperature conditions,
A 40% reduction in energy consumption can be achieved.
(5) Temperature synchronous rise and fall slope control (IEC68-2-56, 68-2-30), no dripping, no condensation and condensation.
(6) Refrigeration advantages: traditional equipment low temperature control method: Ø Refrigeration compressor start and stop control temperature (temperature fluctuation is large, which seriously affects compressor life,
Obsolete technology) Ø Constant operation of refrigeration compressor + heating PID control (causing cooling capacity and heating to offset to achieve temperature dynamic balance
Waste a lot of electric energy) • New PWM cold control technology realizes low temperature energy-saving operation: The new PWM cold control technology realizes
| Capacity (L) | 64 | 80 | 100 | 150 | |
| Inner box size (W*H*D)mm | 400x400x400 | 500x400x400 | 500x400x500 | 500x600x500 | |
| High temperature room | Preheating temperature range | +60ºC~+220ºC | |||
| Heating time | RtºC~+150ºC/5Min | ||||
| Low temperature room | Pre-cooling temperature range | -10ºC~-80ºC | |||
| Cooling time | RtºC~-55ºC/5MinRtºC~-65C/5Min | ||||
| Studio | Temperature shock range | -65ºC~+200ºC | |||
| Temperature fluctuation | ±1.0ºC | ||||
| Temperature uniformity | ±2ºC | ||||
| Conversion time | 8sec | ||||
| Temperature recovery time | 5Min | ||||
| Inner box material | SUS304# stainless steel plate | ||||
| Outer box material | SUS304# matte brushed stainless steel plate | ||||
| Insulation material |
a. High temperature tank: aluminum silicate insulation cotton: b. Low temperature tank: high density PU foam | ||||
| Test Rack | Stainless Steel Rack | ||||
| Structure | high temperature area, low temperature area, test area | ||||
| Valve unit | Forced air unit valve | ||||
| Refrigeration system | two-stage | ||||
| Cooling method: | semi-hermetic two-stage compressor (water-cooled) / fully-closed two-stage compressor (air-cooled) | ||||
| Controller: | South Korea "TEMI" or Japan "OYO" brand optional | ||||
| Compressor: | French "Taikang" or independent research and development | ||||
| Protection device: | no fuse switch, compressor high and low pressure protection switch, refrigerant high pressure protection switch, fault warning system, electronic alarm | ||||
| Accessories: | viewing window (special optional type), two upper and lower adjustable compartments, power-on line hole, casters, horizontal bracket | ||||
| Power supply | AC380V50HZ/60HZ3f | ||||
| Remarks: | The temperature shock test chamber can also be designed according to the customer's requirements | ||||
We have professional packing workers to pack your products!
Packing:
1. Out packing:Standard export wooden case.
2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
Shipping:
You can specify other shipping methods such as Airmail, FEDEX or DHL. We shall let you know about the shipping cost after receipt ofyour order. It's more preferable for you to provide us with your own FEDEX/DHL account number so that the delivery charge can be charged directly from your account.
1. Q: What is your warranty ?
A: 12 months product warranty, but lifetime for services. Free accessories will be provided if any performance failure occurs within 12 months caused by non-human damage.
2. Q: How-to vedio provided ?
A: Yes, if required, our engineers will record a specialize how-to video for you.
3. Q: 1.Are your company a trading one or a factory?
A: Yes, we are a manufactured factory+ trade (integration),15 years focusing on test instruments field,7 years exporting experience.,warmly welcome to visit our plant(factory), we also support OEM and ODM.
4. Q: After an order is placed, when to deliver?
A: Generally about 15~25 working days, If we have stock, we can arrange the shipment within 3 days. Please be awared that our production lead time depends on specific items and item quantities.
5. Q: What about the warranty with after - sales services?
A: 12 months warranty. Besides,we can help you to repair your problem controller freely,even it's not from our factory. What you need to do is to send us the controller. After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.
6. Q: What about the services and product' quality?
A: Each instruments must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate. If necessary, our engineers would be go abroad to training, repair and others help you need.
7. Q:what about the packing of equipment?
A: Covered with air bubble film before put the machine into the stanard exporting wooden case which not only has good shock absorption, impact resistance, heat sso has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}